Kverneland Electrical Control EC, Operation Manual

Page: 29 / 69

Control box
Flowmate Control FMC
29
§4.2 M
AIN SCREEN
2
Switching over between Main screen 1 and Main screen 2 is very easy with the arrow keys.
In
Main screen 2 the following values or information are displayed:
N.B.: The mode of procedure in entering, changing and deleting values in the display is the same
in all menu screens and is described in the Section
"Entering and changing values" .
§4.2.1 Amount of fluid in the spray tank
On the display, the amount remaining in the spray tank is shown. When the user has filled
the container, he can enter the amount directly. During spraying work, the computer
calculates the value back until a value of zero is reached.
On the basis of this remainder and the programmed application rate in l/ha, the computer
permanently calculates the remaining distance or area which can be sprayed with the
remainder in the tank (Display see
Main screen 1 ).
N.B.: The amount must not necessarily be entered. The function of the automatic
regulation of the application rate is not impaired by this.
-
To enter the amount filled, press the OK key , the numeric value flashes.
-
Simultaneous pressing of and can be used to enter a standard value, e.g.
nominal volume, which can be programmed in the Setting menu (SETUP FUNCTIONS).
-
To enter an arbitrary value, press the OK – key. The first number is flashing and can be
changed with the or keys.
Press the key to go to the next number, that starts flashing.
-
Confirm the value entered with the OK key , the next parameter (nozzle type/size)
flashes.
Remaining fluid in spray tank
Nozzle type/size
Amount consumed
Area sprayed
Throughflow or pressure
Drop size