Kverneland Electrical Control EC, Operation Manual

Page: 46 / 69

Flowmate Control FMC
OPERATING INSTRUCTIONS
46
If your spraying computer is equipped with pressure regulation, a correction value for worn or
contaminated nozzles can be entered:
-
For worn nozzles, a value above 100 % is to be selected.
-
For contaminated nozzles, a value below 100 % is to be selected.
§5.20 P
RESSURE OR THROUGHFLOW REGULATION
In Screen 24 you can select whether the regulation of the application rate is done on the basis of
the through flow or the pressure.
Regulation on the basis of pressure
Regulation on the basis of throughflow
§5.21 V
OLTAGE DISPLAY
In Screen 25 the voltages on the control box (upper value) and on the SHC box of the sprayer
(lower value) are displayed.
The display of the voltage values facilitates diagnosis in faults in the energy supply.
The prerequisite for flawless function of the system is, that the two voltage values amount to at
least 9 Volts.
§5.22 T
IME
/ D
ATE
In Screen 26 time and date can be set.
Only after confirmation of the last value (year) with the OK key or quitting the screen will the clock
start again.
§5.23 P
ROGRAMME VERSION
In Screen 27 the version of the software with the matching date is displayed.