Flowmate Control FMC
OPERATING INSTRUCTIONS
50
Procedure to modify the delay
- Switch to input mode by pressing the
OK
key; the value of the rear potentiometer (19, fig. 10
or 11) at maximum steering deflection is
blinking
.
- Press the arrow key ; the delay value is
blinking.
- Change the delay value with the arrow keys and as desired and confirm the new value
with the
OK key
.
§5.25 E
ND
With
Screen 34
, the end in the
Setting menu
is reached.
If you press the arrow key you return to
Main screen 1
.
If you press the
OK key
you go to the
Service level.
§5.26 S
ERVICE MENU
In the service menu, basic settings are made in the factory and normally do not need to be altered.
The service menu can be scrolled with the help of the arrow keys like other menu levels. However,
no alterations can be made.
If alterations have to be made for some reasons, this is only possible if the correct PIN code has
been entered in
Screen 35
.
If need be, please get in touch with the Kverneland after-sales service.
Summary of Contents for Electrical Control EC
