Kverneland Electrical Control EC, Operation Manual

Page: 35 / 69

Control box
Flowmate Control FMC
35
-
If the current accumulated values from Main screen 2 are to be added to the values
already in the memory, all you have to do is press the arrow key and confirm with the
OK key .
After storage or addition, the current accumulated values in Main screen 2 are
automatically reset to “0” .
§4.5 A
IR
-
PLUS CONTROL
From Main screen 1 you press one of the arrow keys 4 times to get to the “Air-plus
control” screen (see fig. page 26). This screen appears only if the sprayer is equipped with a
spray boom with air assistance (Air-plus spray boom).
In this screen you can control the air output of the fan in a range of 0 to 100% in steps of 10%
- Use the arrow keys or to change the air output and confirm with the OK key .
See also the instruction manual of the Air-plus spray boom for more specific recommendations.
§4.6 N
OZZLE RECOMMENDATION
From Main screen 1 you press the arrow key 3 times to get to the “Nozzle
recommendation” screen (see fig. page 26).
Here, the following inputs are necessary:
1. Nozzle type (e.g. XR 110 or AI 110)
2. Required application rate in l/ha
3. Required driving speed
4. Drop size (only possible if the nozzle type supports a drop spectrum)
After these data have been input, a recommendation appears on the screen. It contains the
nozzle size and colour, the necessary nozzle output in l/min and the spraying pressure
necessary for this in bar.
If the recommended nozzle size is not available, either change the driving speed or use a
nozzle which is most similar to the recommended type in its features.