Kverneland Electrical Control EC Operation Manual Download Page 9

Page: 9 / 69

Introduction

Flowmate Control FMC + Electrical Controls EC / GZD-EC

§1.4 I

NTENDED USE

1. The spray computer Flowmate Control FMC, Electrical Control EC and Electrical Control GZD-

EC are exclusively built for normal use in agricultural work (intended use).

2. Any use beyond the above shall be deemed to be not in conformity with the intended use. The

manufacturer shall not be liable for any ensuing damage; the user alone shall bear the risks of
such use.

3. The intended use also includes adherence to the manufacturer’s specified operating,

maintenance and repair Instructions.

4. The spray computer Flowmate Control FMC, Electrical Control EC and Electrical Control GZD-

EC may only be used, maintained and repaired by persons familiar with the machines and
instructed in the dangers involved.

5. The relevant accident prevention regulations and all other generally recognised health and

safety and road safety regulations must be observed.

6. Any modifications to the machine by the customer shall automatically cancel any liability of the

manufacturer for any resulting damage.

§1.5 S

AFETY INSTRUCTIONS

Please also observe the safety instructions in the operating instructions for the basic unit
of the sprayer !

Summary of Contents for Electrical Control EC






































































Search results

Summary of Contents for Electrical Control EC

Reviews:

Brands by name

Popular brands

Kverneland Electrical Control EC, Operation Manual

Search results

Summary of Contents for Electrical Control EC

Reviews:

Brands by name

Popular brands