Kverneland Electrical Control EC, Operation Manual

Page: 40 / 69

Flowmate Control FMC
OPERATING INSTRUCTIONS
40
)
Use the following procedure for calibration:
•
Bring the hydraulic hillside correction to the middle position by activating switch (D) on the
control unit (fig. 6).
The central position has been reached when the lower rectangular tube (17) of the
pendulum frame is parallel to the carrying frame (16) (fig. 7).
The central position can be determined with aid of a spirit level in the boom, while the
machine is standing on a horizontal underground (fig. 8).
•
The sign (M) for the position of the hydraulic hillside correction on the display must be no
exactly in the middle at the display of the control unit (fig. 6) If not, another calibration of the
middle position of the hydraulic hillside correction is necessary.
•
Switch to the entry mode by pressing the OK – key ; the symbol for the middle position “OK =
0” is blinking.
•
Confirm the middle position by pressing the OK – key ; The middle position is now calibrated.
Fig. 8
15
17
16
Fig. 7
Fig. 6
M
D