Kverneland Electrical Control EC, Operation Manual

Page: 22 / 69

Flowmate Control FMC
OPERATING INSTRUCTIONS
22
§3.2.3 Occupation of the switches
The switches for the hydraulic functions have been provided with symbols and have the following
function:
Raise/lower spray boom
1
Hydraulic hillside correction
2
Independent slope correction,
right
HC: Vertical folding of the right side boom package
Independent slope correction,
left
HC: Vertical folding of the left side boom package
Lockage of the pendulum system
open/close
HSS, HSA, HB(WP):
Inner boom parts (right and left) folding out-/in
HC 18-24 : Horizontal folding out-/in of right or left boom segments
HE : Folding out- /in of the complete boom.
HSS, HSA, HB(WP) :
Outer boom parts (right and/or left) folding out-/in
Drawbar – or axle steering : - Automatic mode
3
- Automatic middle position
3
- Manual mode
Drawbar – or axle steering in manual mode: right/left
N.B.: The occupancy of the switches and the functions can differ depending on the type and
equipment of the spray boom.
(See also the operating instructions for the sprayer and the spray boom)
1
If the height adjustment of the boom is done directly via a single-acting hydraulic ventil on the tractor, the
switch for height adjustment on the control unit is without function .
2
The hydraulic hillside correction is blokked electronically when the lockage of the pendulum is closed.
3
The function Automatic mode is blokked electronically when is the spray boom is folded in.