manualshive.com logo in svg

Kverneland Electrical Control EC, Operation Manual

Share
Download
Kverneland Electrical Control EC Operation Manual Download Page 25

Control box 

Flowmate Control FMC 

25

§3.4  E

NTERING AND CHANGING VALUES

 

Entering and changing of values is done in the same way on all menu screens. The entry is done 
via the 

4 arrow keys

 and the 

OK key

 on the keyboard (12) (fig. 5). 

The keys have the following functions: 

By pressing the 

OK key

, you reach the entry mode, the first changeable value in the menu 

screen in question flashes. 
The value can now be altered via the       

or     

  arrow keys. 

If you are already in the entry mode, pressing the 

OK key 

confirms the entry of a value, the 

next entry value flashes and can be altered. 
 
With the arrow keys              you change from one menu screen to the next within one 
menu level. 
If you are already in the entry mode, you can change from one entry value to the next 

without

 altering the value. 

 
By using arrow keys       and       the flashing value can be altered in entry mode. 
Saved values, e.g. sprayed area and quantity consumed, can be deleted by pressing the 
arrow key     . 
If both arrow keys are pressed at the same time, the basic setting of the entry value in 
question appears. 
After entry or alteration of a value, the 

OK key

 must be pressed as confirmation. 

 

OK 

Summary of Contents for Electrical Control EC






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands