Kverneland Electrical Control EC, Operation Manual

Page: 39 / 69

Control box
Flowmate Control FMC
39
§5.3 S
IGNAL VOLUME
In Screen 5 the volume of the signal sound can be set from 0 – 100 %.
The setting is not done linearly (basic setting = 100 %).
Increase volume
Decrease volume
§5.4 R
EMAINING DISTANCE OR REMAINING AREA
In Screen 6 you can state whether Main screen 1 (page 27) is to display the value for the
remaining distance in meters or area in hectares (basic setting = mtr).
Remaining area in ha
Remaining distance in m
§5.5 F
ILLING AMOUNT AND MINIMUM FILLING LEVEL
In
Screen 7 2 figs can be set:
The first value should sensibly match the quantity, with which the spray tank is most frequently
filled. As a rule, this is the nominal volume.
The value set here can be very easily taken on in
Main screen 2 as the standard filling amount
after the filling process (see paragraph §4.2.1 Amount of fluid in the spray tank page 29).
With the second value, the minimum filling level for the warning function is set. If this value is
reached or fallen short of, the driver is informed about an almost empty spray tank with the
following warning. A signal sounds at the same time.
The warning report has no influence on the automatic regulation of the application rate.
§5.6 C
ALIBRATION OF THE MIDDLE POSITION HILLSIDE CORRECTION
The middle position of the hydraulic hillside correction is calibrated in screen 8.
For a correct display of the symbol ( M ) (fig. 6)of the hydraulic hillside correction, the appropriate
sensor must be calibrated correctly.