Kverneland Electrical Control EC, Operation Manual

Page: 36 / 69

Flowmate Control FMC
OPERATING INSTRUCTIONS
36
-
To input, press the OK key , the type of nozzle flashes.
-
Use the arrow keys or to input the required type of nozzle and confirm with the
OK key , the application rate flashes.
-
In the same way, input the required application rate in l/ha, driving speed in km/h and
drop size (only possible if the type of nozzle supports a drop spectrum) and confirm with
the
OK key .
In our example, the system suggests 2 solutions, which appear alternately on the screen
(with an audible signal):
If the admissible pressure range of the nozzle cannot be adhered to with the nozzle stated,
the required application rate, driving speed and drop size, neither the pressure nor the type
of nozzle are displayed, but merely crosses:
After you have made a note of the recommended solutions, change to
Main screen 2 (see
page 30) and input the recommended nozzle and possibly the drop size you have selected.
The computer is now in a position to warn you if the admissible pressure range of the
nozzle (or possibly the drop size you have selected) is exceeded.
§4.7 T
IME
/D
ATE
From Main screen 1 you can reach the “Time/Date ” screen by pressing arrow key once (see
fig. page 26).
In the time without spraying, the display can also be used as a clock . However, this is only
possible if the sprayer is mounted to the tractor, as the supply of energy of the control box
is via the connection wire of the sprayer and the distribution box on the sprayer.
The time can be set in the
Setting menu (SETUP FUNCTIONS).