![Kval 990-HQ Operation Manual Download Page 77](http://html.mh-extra.com/html/kval/990-hq/990-hq_operation-manual_2012807077.webp)
Setup Hinges 1-3 Screens
2-49
990-HQ Operation Manual
Setup Hinges 1-3 Screens
The
KVAL 990-HQ
has a built in calibration routine to cut a horizontal slot with known parameters.
Each tool in the Carriage Head will be part of the slot drilling process.
Press the
Calibration and Hinge #1- #3 Calibration
buttons to access
these screens. Tune the Hinge Carriages and the assemblies located
in the hinge carriages by entering and storing offsets to bring into
reference.
•
Setup Hinge 1
adjusts left head.
•
Setup Hinge 2
adjusts center head.
•
Setup Hinge 3
adjusts right head.
Calibration Slot
This machine is equipped with a calibration routine that will
Select the calibration routine from the
Manual Screen
to begin this
calibration cut.
Dimensions of a Calibration Cut
Drill: Center
Standard Router: Outer Lip
Counter Rotate Router: Inner Cut