Machine Control Buttons
Home Machine:
This button starts the home sequence on
the machine, which causes the movable fence to slowly
scan to find a physical reference point on the frame.
When this point is found, the position is stored and then
used to calculate the location of all moves after this. The
home sequence must be performed every time the
machine is powered up or reset.
Reset Machine:
If a fault occurs that cannot be cleared,
press the this
button. The machine return to the start
position
before
homing. Press
Home Machine
after Reset
Machine
Stop Door Sequence:
Press to stop the door in the process.
Shut Down System:
Press this button to shut down the computer. Use this button as part
of the normal shutdown process.
See “How to Power Down the 990-HQ” on page 2-25.
Preset Selection Button Group
Pressing a preset button, calls
one of twelve presets stored in
memory. All the settings of the
preset will populate the
Main
Screen
entries.
Pressing the
Modify Preset
button allows the operator to store the active
Main Screen
entries. After pressing the
Modify Preset
button:
1.
Select one of the buttons in which to save the parameters
2.
Name it to a appropriate label.
3.
Select the save button to save to memory.
Door Spec Group
Set or display the parameters for the door in the
Door Spec
group. The
settings includes:
•
Current Preset:
Displays the current Preset that is applied.
•
Length:
Select the length of the door from the designated lengths
from the button set.
•
Thickness:
Displays the door thickness.
Main Screen
2-32
990-HQ Operation Manual
