About the Eight Shooter System
2-13
990-HQ Operation Manual
About the 8 Shooter Assembly
Settings for the Eight Shooter assemblies are entered in the User Interface. Door is automatically
positioned while the operator loads and clamps a hinge jamb. Routing and boring occur while the
operator places hinges into the nests of the hinge applicators.
Horizontal Rails.
Allows the Eight Shooter
to the move to the side
for Maintenance and
Manual application of
Hinges
Vertical Rails:
Tubes:
Delivers Screws to Hinge
Applicator by way of plastic
tubes.
Driver Assembly:
Drives screw driver
assembly
See “About the Driver
Assembly” on page 2-
14
Hinge Application:
See “About the Driver
Assembly” on page 2-14
Vertical Cylinder:
Drives Eight Shooter
Up and Down the verti-
cal rails
Spring:
Tension for
vertical movement
Air brakes
are
located on the vertical
rails. The brakes will
operate when air
pressure goes down
a set reference level.
FIGURE 4.
Eight Shooter Call-Outs
