15
LIGHTING SYSTEM, INSTRUMENTS
98
600610-12
Main work
–
Remove protection cap
1
.
600612-10
–
Pull bulb socket
2
out of the reflector.
–
Pull parking light bulb
3
out of the bulb socket.
–
Insert a new parking light bulb in the bulb socket.
Parking light (W5W / socket W2.1x9.5d) (
p. 176)
–
Insert the bulb socket in the reflector.
–
Insert the protection cap.
Finishing work
–
Install the headlight mask with the headlight. (
p. 97)
–
Check the headlight setting. (
p. 96)
15.7
Changing the headlight bulb
Note
Damage to reflector
Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
p. 96)
600610-10
Main work
–
Pull off connector
1
.
–
Take off protection cap
2
of the headlight bulb.
600611-10
–
Detach spring bar
3
.
–
Remove headlight bulb
4
.
–
Insert a new headlight bulb into the headlight housing.
Headlight (H4 / socket P43t) (
p. 176)
–
Fix the headlight bulb in the headlight using the spring bar.
–
Mount the protection cap. Attach the connector.
Finishing work
–
Install the headlight mask with the headlight. (
p. 97)
–
Check the headlight setting. (
p. 96)
Summary of Contents for 2011 690 SMC AUS
