KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 73 / 88

KT-Elektronik SOL3-3
F Function F
S Function block parameter description/value range
(factory default setting)
09 Antifreeze program II 1
0
CO5 -> F09 - 0: Antifreeze program I (reduced anti-
freezing) Function block parameter:
Anti-freezing threshold / –15 to 3 °C (3 °C)
CO5 -> F09 - 1: Antifreeze program, Function block
parameter:
Anti-freezing threshold / –15 to 3 °C (3 °C)
19 Temperature monitoring 0 CO5 -> F19 - 1: Temperature monitoring active
20 Sensor calibration 1 CO5 -> F20 - 1: Setting all sensor calibration values
CO5 -> F20 - 0: Deleting sensor calibration values
21 Locking manual operating
mode
0 CO5 -> F21 - 1: In manual operating mode switch
position
automatic operating mode is driven
22 Locking the rotary switches 0 CO5 -> F22 - 1: Rotary switch has no functionality
F Function block number, FS Factory default setting
CO6: Modbus
F Function FS Function block parameter description/value range (factory
default setting)
01 Modbus 1 CO6 -> F01 - 1: Modbus active
02 Modbus-16-bit
addressing
0 only with CO6 -> F01 – 1
CO6 -> F02 - 1: 16-bit addressing,
CO6 -> F02 - 0: 8-bit addressing
03 Modem function 0 CO6 -> F03 - 1 only with • CO6 -> F01 - 1
CO6 -> F08 - 1
04 automatic
Modem
configuration
0 CO6 -> F04 - 1 only with • CO6 -> F03 - 1
CO6 -> F08 - 1
05 Blocking the
BCS dial up
0 CO6 -> F05 - 1: no dial up on failure,
only with CO6 -> F03 - 1
06 BCS dial up
on corrected
failures
0 CO6 -> F06 - 1: additional dial up on corrected failures, only
with CO6 -> F03 - 1
07 Control system
monitoring
CO6 -> F07 - 1: Reset all collective level bits to "autonomous"
on missing connection,
only with CO6 -> F01 – 1
08 SMS CO6 -> F08 - 1: SMS delivery active
F Function block number, FS Factory default setting
EB_37383_SOL3-3_EN002
73