KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 58 / 88

Installation and operating manual KT-Elektronik
As long as valid Modbus queries are captured, the controller resets the time monitoring;
but after a lapse of 30 minutes all collective level bits are reinitialized to "autonomous".
ATTENTION!
When installing, the relevant standards and regulations related to lightning protection
and over-voltage/voltage surge protection have to be attended to.
Functions FS Configuration
Modbus 1 CO6 -> F01 – 1
Modbus with 16-bit addressing 0 CO6 -> F02 – 1
Modem function 0 CO6 -> F03 – 1
Automatic modem configuration 0 CO6 -> F04 - 1
Blocking the BCS dial up 0 CO6 -> F05
BCS dial up on corrected failures 0 CO6 -> F06
Control system monitoring 0 CO6 -> F07 – 0
Setting FS Parameter level / Value range
Station address (ST) 255 PA6 / 1 to 247
with CO6 -> F02 - 1: 1 to 32000
Wiring diagram for communication module iCon485
58
EB_37383_SOL3-3_EN002