KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 14 / 88

Installation and operating manual KT-Elektronik
1.6 Setting the party mode (heating circuit/auxiliary heating)
The party mode overrides the nominal operation of the controller by starting a new or
prolonging a programmed daytime mode time range for the duration of the time set for
the party mode. The party mode timer starts working once the rotary switch is moved to
the "automatic mode" position (left hand). When the timer runs out the party mode
function is reset to 00:00.
The party mode is set one after the other for each circuit with the rotary switch:
Setting FS Value range
initiate or continue nominal operation 0 h 0 to 48 h
Procedure:
Move rotary switch to the position “party mode” .
Select the circuit for which daytime mode shall be initiated or prolonged.
3
Storage tank auxiliary heating
Confirm selected circuit.
Display: shows 00:00 or remaining party timer time.
Set desired non-recurring duration.
Move the rotary switch back to the "Information level" position (left
hand).
Note:
The lapse of time of the party timer is displayed in 15 minute increments.
14
EB_37383_SOL3-3_EN002