KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 54 / 88

Installation and operating manual KT-Elektronik
8.3 Temperature monitoring
If the temperature in one of the control circuits deviates more than 50 K from normal for
a period of 30 minutes, the error message "Err 6" is generated (temperature monitoring
alarm).
Functions FS Configuration
Temperature monitoring 0 CO5 -> F19 - 1
8.4 Error status register
The error status register is used to report controller or system failures. In modem
operating mode with error reporting function, each change of error status triggers a dial
up connection to the building control system (BCS) to report the status change. The
errors that should affect the error status register can be set after having entered the
access code 0025.
The default factory setting „465“ causes that only the error messages in bold in the
following table affect the error status register.
Error message Description Decimal value FS Exampl
e
Err 1 Sensor failure 1 1 1
Err 2 - 2
Err 3 - 4
Err 4 Max. charging temperature reached 8
Err 5 16 16
Err 6 Temperature monitoring alarm 32 32
Err 7 Unauthorized access 64 64
Err 8 - 128 128
Err 9 - 256 256
Sum Sum
Factory default setting, access code 0025 = 465
Example: Error status register if sensor failure and alarm = 33
54
EB_37383_SOL3-3_EN002