KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 19 / 88

KT-Elektronik SOL3-3
2 Commissioning
The configuration procedures and parametrization described in this chapter can only be
performed by entering a valid controller access code.
The access code provided by the factory for first time use can be found in the appendix.
To avoid an unauthorized use, it is recommended to cut out or black out the code.
Additionally the standard code can be replaced by an individual one (Chapter 7.5).
2.1 Setting the system variant ID
Several hydraulic system variants are available. Each variant is represented by an
identification number. The variants are illustrated in chapter 4. The available controller
functions are described in chapters 5, 6 and 7.
Editing the variant ID resets previously entered function blocks to factory default settings.
At parameter level, function block parameters and settings will be preserved. The variant
ID can be set at configuration level.
Procedure:
Switch to configuration and settings level.
Display shows 0 0 0 0
Enter a valid access code.
Confirm code.
Display: PA3
Select system variant.
Switch to edit mode.
Edit system variant ID.
Confirm ID.
Display: End
Leave configuration and settings level.
Display: 0 0 0 0
Move the rotary switch back to the "Information level" position
.
EB_37383_SOL3-3_EN002
19