KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 71 / 88

KT-Elektronik SOL3-3
12 Appendix
12.1 Function block lists
CO3: Solar circuit
F Function FS Function block parameter description/value range (factory default
setting)
01 Forced pump
operation 0 CO3 F01 = 1 - Regular forced pump operation active
see section 5.10
02 Collector
antifreeze 0 CO3 F02 = 1 - Antifreeze active
see section 5.11
03 Start up function
(tube collector
function)
0 CO3 F03 = 1 - Start-up function active
see section 5.9
04 Rotation speed
control CO3 F04 = 1 Rotation speed control active
see section5.6
05 Solar heat meter 0 CO3 F05 = 1 - Collector performance heat meter
see section 5.5
Function block parameter:
Heat capacity at 25°C, Heat capacity at 100°C
06 Heat meter-
impulse source 0 see section 5.5
CO3 F06 = 1 - Volume flow rate sensor active
Function block parameter: Impulse value
CO3 F06 = 0 - Volume flow rate replacement value active
Function block parameter: Volume flow rate replacement value
07 CVF CO3 F07 = 1 - Collector flow sensor active
see section 5.3
08 CRF CO3 F08 = 1 - Collector return flow sensor active
see section 5.3
09 CVF for CTP 0
CO3 F09 = 1 -Collector flow sensor CVF for exchanger pump
CTP active
see section 5.13
10 Temperature dif-
ference controller 0
10K
2
7
CO3 F10 = 1 Temperatur difference controller active
Function block parameter
Temperatur difference set point / -30 bis 160°C
Reference input / Terminal number 1...9
Controlled input / Terminal number 1...9
F Function block number, FS Factory default setting
EB_37383_SOL3-3_EN002
71