KT-Elektronik SOL3-3, Installation And Owner'S Manual, Page: 17 / 88

KT-Elektronik SOL3-3
Procedure:
In the advanced information level select the
menu item "vacations". Display:
Confirm selection "vacations".
Display: START, – –.– –
Eventually select item – – – –.
Enter edit mode for vacation time. flashes
Change beginning of vacation.
Confirm setting.
Display: STOP, – –.– –
Change end of vacation.
Confirm setting. Black squares are shown below
the figures 1 to 4 at the head of the display for
the assignment of the vacation to each control
circuit.
Select control circuits for which the vacation
shall be applied.
current vacation for heating circuit Rk1
The vacation can be assigned to a single circuit
or to any combination of circuits (Rk1, domestic
water circuit).
To enter more vacation times reselect – – – – and repeat the steps highlighted in grey.
Select End
Leave menu "vacations".
Note: Vacation times can alternatively be entered in level PA5 (Chapter 2.2).
Remove vacation:
In menu "vacations" select the beginning of the vacation time to be
deleted.
Confirm selection.
Select item – – – –.
Delete vacation.
Note: Saved vacation times should be deleted by the end of the year, so they are not
automatically taken over into the next year.
EB_37383_SOL3-3_EN002
17