KROHNE optiplex 1300 c, Handbook

Page: 6 / 95

Handbook OPTIFLEX 1300 C
OPTIFLEX 1300 C 6
0.3 Visual inspection
0.3.1 Instrument Integrity
The meter withstands corrosive environments.
Visually inspect the meter before installation to ensure that it has not been damaged in transit.
0.3.2 Material compatibility
Check that the flange, gasket and probe materials are compatible with the product in the tank.
Use the information from the following sources:
•
converter nameplate
•
flange
•
approval certificates
0.4 Standards and approvals
0.4.1 Standards
All versions of the device conform to European Union electromagnetic compatibility (89/336/CEE) and low
voltage equipment (73/23/ CE) Directives and Standards that allow use of the CE mark.
These and other relevant standards are listed in Standards.
0.4.2 Approvals
Versions equipped with the necessary options are suitable for use in hazardous locations and may be
certified according to European or American-Canadian approval requirements.
These are:
ATEX (European) -approval
Joint FM and CSA (American-Canadian) -approval
For further information, please refer to:
•
Special manuals (supplied on a CD-ROM with the device)
•
Approvals