OPERATION
kortho
QiC i-series
H325 IAE
Rev.: 004
8-28
CAUTION:
Always use the lowest density setting possible, this as the lifetime of the printhead will be
influenced by the density setting.
Print quantity
This value sets the number of labels to print. When the set value has been reached, the printer will stop the
printing process and the General alarm output will be activated to indicate that the batch is complete. When
set to zero the current label will print indefinitely.
Debounce
The debounce time is the time a print request signal needs to be active to be regarded as a valid print
request. A shorter signal is considered to be noise and will not result in a print. The unit are milliseconds.
Print queue
Set this to
On
if a print request signal that’s coming in during a printcycle need to be queued. When set to
Off
a print request signal that’s coming in during a printcycle will set the Print missed error/warning.
Print queue means that a print request is put in the queue when the system is busy making a print. The print
queue can store 1 print request.
Note:
When the print queue contains a print request, this print request will be executed directly after the
current print has been made. When multiple print requests come in during a print cycle, only 1 will
be stored in the print queue. The others are simply disregarded. This in turn implies that the Print
missed error or warning is not active when the print queue is activated.
CAUTION:
If a print request is received during the current print cycle, the system will make a print right after
the current print has been made. When the substrate has not moved, it will place the print directly
over the previous print. If the substrate normally starts moving after a print, the system will
attempt to make a print on the substrate which could be moving. In that case, the possibility exists
that the substrate will break, the ribbon will break or other errors will occur.
i
Summary of Contents for qic i series
