SAFETY
kortho
QiC i-series
H325 IAE
Rev.: 004
4-4
Since the front button and both encoders are located in the coding unit, the possible problem could
also be in the wiring to the control unit or a defective front button switch or encoder device.
Make sure only upgrade file of the QiC Control version that should be installed is present on the
USB thumbdrive. Otherwise there is a chance that the wrong version will be installed.
Occasionally repositioning the platen can average the wear and increase the life span of the platen.
Removing the air pressure allows the head to lower and provide easier access to the two screws.
4.2 Control unit
4.2.1 General information
Fig. 4.1
Control unit identification label
The part number and serial number of the control unit can be found on the identification label which is also
located at the back of the control unit, see Fig. 4.1. The coding unit has its own part number and serial
number. The coding unit identification label can be found on the base plate of the coding units (take out the
magazine).
The contact details of Korthofah can be found on the back of the control unit, see Fig. 4.2 .
4.2.2 Power supply
For safe operation, the power cable to the control unit must be connected to a properly grounded single-
phase supply of the appropriate voltage. The power supply must comply with the power supply
information that is written on the back of the control unit, see Fig. 4.2 and refer to Appendix A.
Fig. 4.2
Power supply information
1.
Power supply label
2.
Contact details
3.
Identification label
Summary of Contents for qic i series
