DIAGNOSTICS / TROUBLESHOOTING
kortho
QiC i-series
H325 IAE
Rev.: 004
9-22
Home timeout.
Verify whether the air pressure is set to 0,4MPa (4 bar) (0,5 MPa
for QiC 107i).
Remove the magazine and lower the printhead.
Manually move the printhead and check for any obstruction.
Ensure that the print head can reach the full home position.
Print position
Check whether the air is applied to the printer.
timeout.
Verify whether the air pressure is set to 0,4MPa (4 bar) (0,5 MPa
for QiC 107i).
Remove the magazine and lower the printhead.
Manually move the printhead and check for any obstruction.
Print missed.
Ensure that production line speed has not been increased and
the substrate is running free.
Check position of print sensor.
9.4.3 Print request signal sensor
Fault indication
Action(s)
Sensor does not detect
passing product..
In case of a photocell:
-
Check whether the lens (front side) of the photocell is clean.
-
Check whether the sensitivity of the photocell is properly set.
-
Check whether the photocell connector (X3) is properly connected to the
control unit.
-
Check whether the photocell does not detect anything in the
background. Normally, the LED indicator on the photocell is off if no
substrate is present.
In case of a switch/relay/PLC contact:
-
Check whether the interface cable connector (X3) is properly connected
to the control unit.
-
Check whether the signal is really generated.
-
Check whether all wiring between sensor and control unit is mounted
correctly.
9.5 Error/warning messages
When problems occur the system will generally report an error message. The error message will be displayed on
screen. As example see Fig. 9.29. Depending on the kind of error, the alarm output will also be set. Besides error
messages the system will also report several warnings.
Summary of Contents for qic i series
