OPERATION
H325 IAE
Rev.: 004
kortho
QiC i-series
8-27
8.6.6 Print settings
To change the print settings of the printer touch the
button.
Fig. 8.38
Print settings menu
Changing the print settings
To change numeric settings:
1.
Touch the
+ / -
buttons, or
2.
Touch the value shown to enter it from the numerical keyboard.
To change selectable settings:
1.
Touch the button and the setting will change (toggle function), or
2.
When touching the button a list with choices will appear from which the required setting can be
selected.
Print delay
This value sets the delay. Delay is the time, set in milliseconds, which the system will wait after receiving a
print request before making the actual print.
On most host machines the print request signal is applied at the end of the machine cycle, so just at the
moment the substrate movement stops. Because of the machine dynamics the substrate quite often moves a
bit backwards and forwards after that. This means that the printer will start printing while the substrate is
still moving. To prevent this the
Print delay
can be set.
Density
This value varies the amount of energy applied to the thermal printhead and therefor the amount of heat
that is applied to the ribbon. It is required to set the density for each individual application (combination of
e.g. substrate, ribbon, temperature, humidity) to get the best print quality possible.
CAUTION:
If not enough heat is applied to the ribbon, the pigment that makes up the printed label may not
adhere correctly to the product. If too much heat is applied to the ribbon it may not adhere
correctly or potentially the print head could be damaged.
Summary of Contents for qic i series
