H325 IAE
Rev.: 004
kortho
QiC i-series
11-1
11 DISMANTLING & DISPOSAL
At the end of the technical lifetime of the system it should be dismantled and disposed according to local
regulations. The general guide line to do so is described.
11.1 Dismantling
Separate the printer parts in this order:
11.1.1 System
1.
Switch off the system.
2.
Unplug the mains power cable.
3.
Disconnect all remaining connections from the control unit.
4.
Remove the supports.
5.
Separate the supports from the coding unit and the control unit.
11.1.2 Coding unit
1.
Open the back cover of the coding unit.
2.
Remove the printed circuit board.
3.
Remove the LED’s, wire loom, carriage encoder module and the ribbon encoder.
4.
Remove the printhead.
5.
Treat the printed circuit board and the printhead as electronic waste.
11.1.3 Control unit
1.
Open the control unit.
2.
Remove the printed circuit boards.
3.
Remove the touch panel.
4.
Remove the LED’s, net-entry and wire looms.
5.
Remove the power supplies.
6.
Treat the printed circuit boards, touch panel and power supplies as electronic waste.
11.1.4 Sensor devices
1.
Treat the photocell as electronic waste.
11.1.5 Ribbon
1.
Recycle or dispose of waste in compliance with current local legislation, preferably via a certified
collector or company. Do not contaminate the ground or water with waste, do not dispose of waste
into the environment.
Summary of Contents for qic i series
