INTRODUCTION
H325 IAE
Rev.: 004
kortho
QiC i-series
1-3
A general impression of the control unit TsC12 dimensions is given in Fig. 1.2. The dimensions (H x W x D)
of the control unit TsC12 are 186mm x 98mm x 239mm.
As the different printer type require different settings there is a control unit available for each type of coding
unit.
Part.nr. Description
817332 Control unit TsC12, QiC 30i
818242 Control unit TsC12, QiC 53i
818255 Control unit TsC12, QiC 107i
The electrical requirements for the power supply of the 30i and 53i printers are:
Voltage rating: 100-120 / 200-240 Vac;
Frequency rating: 50 and 60Hz;
Current rating: 1,55A / 0,75A
Power rating: 150VAmax.
Fuse rating: 2x T3,15A 250Vac (slow acting).
The electrical requirements for the power supply of the 107i printers are:
Voltage rating: 100-120 / 200-240 Vac;
Frequency rating: 50 and 60Hz;
Current rating: 2A / 1A
Power rating: 200VAmax.
Fuse rating: 2x T3,15A 250Vac (slow acting).
All external equipment that is connected to the control unit interface must be double insulated to qualify the
whole installation as a separated extra-low voltage (SELV, Class II) system.
CAUTION:
Make sure the interface cable is no longer than 30m. Using a cable longer than 30m can cause EMC
interference.
The control unit has a bespoke hardware user interface, communication ports and host I/O-ports.
The ambient temperature must be between 5 °C and 40 °C, with a relative humidity between 10% and 90%
(non-condensing).
1.4.3 Ribbon
The ribbon supplied by Korthofah BV is specifically selected for the QiC i-series thermal transfer printers. It
guarantees an optimum print head protection and so print head life time in combination with an optimum
print result. In order to guarantee an optimum print result on each packaging material Korthofah BV
supplies a wide range of different ribbon types. In addition, ribbons are available in a variety of colours.
1.
Back coating
2.
Carrier film
3.
Ink/pigment
Summary of Contents for qic i series
