TRANSPORT & STORAGE
kortho
QiC i-series
H325 IAE
Rev.: 004
5-2
For movement from building to building:
1.
Keep the coding unit upright with the printhead in its upper position to avoid the printhead gets
damaged during the transport.
2.
Avoid shocks and vibrations during the transport.
3.
Use original or equal packaging for the printer equipment.
a.
Label the box with ‘keep dry’ labels like label (2) of Fig. 5.1 (visible at all sides).
b.
Label the box with ‘fragile’ labels like label (3) of Fig. 5.1 (visible at all sides).
c.
Mark the top of the box with ‘this side up’ labels like label (4) of Fig. 5.1 (visible at all sides).
5.1.3 Pre-storage procedure
The printer storage location and time is determinative for the pre-storage procedure:
When still mounted on the support but idle for at least one month:
1.
Keep the coding unit upright with the printhead in its upper position to avoid the printhead gets
damaged.
2.
Avoid shocks and vibrations during the transport.
3.
Place a dust cover or bag over the coding unit.
4.
Place a dust cover or bag over the control unit.
For storage prior to distribution:
1.
Keep the coding unit upright with the printhead in his upper position to avoid the printhead gets
damaged during the handling and the transport.
2.
Avoid shocks and vibrations during the handling and the transport.
3.
Store in the original or equal packaging.
a.
Label the box with ‘keep dry’ labels like label (2) of Fig. 5.1 (visible at all sides).
b.
Label the box with ‘fragile’ labels like label (3) of Fig. 5.1 (visible at all sides).
c.
Mark the top of the box with ‘this side up’ labels like label (4) of Fig. 5.1 (visible at all sides).
4.
Store the printer, in the original or equal packaging with topside upwards, in a dry place at ambient
temperature between 5 °C and 40 °C.
5.2 Ribbon
The ribbon should be stored at a temperature of about 20
o
C. Do not expose the ribbon to direct sunlight
and/or extreme humidity.
5.2.1 Handling and storage
Handling
:
As with all chemicals, good industrial hygiene practices
should be followed when handling this material.
Always wash hands thoroughly after handling and before
eating, drinking, or using tobacco products.
Avoid inhalation of ink particles, in case of flaking.
Storage
:
Keep in a dry and cool place.
Summary of Contents for qic i series
