H325 IAE
Rev.: 004
kortho
QiC i-series
6-1
6 INSTALLATION
6.1 Requirements
6.1.1 Provided by the customer:
Power:
For 30i and 53i: Voltage rating 100-120Vac / 200-240Vac, current rating 1,55A / 0,75A, frequency
rating 50 / 60Hz, power rating 150VAmax - including clean protective earth.
For 107i: Voltage rating 100-120Vac / 200-240Vac, current rating 2A / 1A, frequency rating 50 / 60Hz,
power rating 200VAmax - including clean protective earth.
The electrical circuit to which the printer is connected must be equipped with a 30mA residual current
device (RCD).
A print request-signal (e.g. output of the host machine or a photocell signal).
Sufficient space for installation and operation.
Compressed air, dry and oil free (ISO 8573-1:2010 [4:4:3]), with a pressure of 0,4 MPa at the printer
(0,5 MPa for QiC 107i). Input to the air regulator should be 0,7 MPa to 0,8 MPa. Distance between
regulator and printer should be as short as possible and no longer then 3m. The air connection on
the coding unit has an outer diameter of 6mm and an inner diameter of 4mm. The minimum inner
diameter of the air tubing must be 4mm.
Optional:
An error input on the host machine. This will stop the host machine when the printer reports an
error (general printer alarm).
A warning-signal input on the host machine (warning alarm).
A busy-signal input on the host machine. So the host machine can detect that the printer is in a print
cycle (printer busy).
Note:
Refer to Appendix D, Connections, for the connection options.
6.1.2 Equipment
Printer set, see section 6.2.1.
Printer bracket, see section 6.3.1 and 6.3.2.
Air reducer, see section 6.3.3.
6.2 Unpacking
6.2.1 Coding unit
The coding unit consist of two main parts, the printer body that hold the printhead and the magazine that
holds the ribbon.
i
Summary of Contents for qic i series
