MAINTENANCE
kortho
QiC i-series
H325 IAE
Rev.: 004
10-4
Before installing the printhead, please adhere to these precautions:
Ensure that the printer is switched off and isolated from the mains supply.
Discharge yourself before handling the equipment (a grounding wrist strap should be used).
Do not touch any components on the printhead with your hand or any other conductive equipment.
Do not touch the heater line surface with bare hands to avoid corrosion.
Do not place the equipment on or near materials such as Styrofoam, plastic and vinyl. Keep
printhead in anti-static bag used for transporting until ready to fit.
Other useful precautions:
Residue on heater line should be removed with ethanol or isopropanol in order to avoid extensive
wear.
Adjust the coding unit to have an even pressure across the width of the printhead.
Use ribbon which is free from Na+, K+, and CI- ions.
Use ribbon which is designed to reduce the friction between the printhead and the ribbon.
Use a ribbon which is designed not to generate static voltages.
The printhead should be free from any condensation to avoid corrosion.
10.5.2 Printhead replacement
1.
Use a 2.5mm Allen key to remove the two screws holding the thermal printhead in place.
Note:
Removing the air pressure allows the head to lower and provide easier access to the two screws.
Fig. 10.4
Removing thermal printhead screws
2.
Take the connector clamp (1 in Fig. 10.5) from the cable connector.
3.
Disconnect the cable plug from the thermal printhead socket.
CAUTION:
The cable plug should be gently taken out of the printhead socket taking care not to pull directly on
the wires.
i
1.
Printhead screw
2.
Printhead
Summary of Contents for qic i series
