APPENDIX F, QUICK REFERENCE
Kortho
QiC i-series
H325 IAE
Rev.: 004
G-2
Error 42
Wrong FPGA. The software is incompatible with this model type. Load the appropriate
software.
Error 43
Wire too tight.
Error 44
The printer is paused. Start the print process to continue.
Error 45
The coding unit type is unknown. Check the coding unit and connections.
Error 47
There is no coding unit detected. Connect a coding unit or check the connections.
Error 48
The total size of the multi-label is too large. Reduce the label size.
Error 49
Maximum number of labels reached. Remove a label before adding a new one.
Error 52
The printer is almost out of ribbon.
Error 53
Printhead carriage encoder error. Check the air pressure and the mounting of the encoder.
Error 54
There is no label loaded to print. Load a label.
Error 55
Use internal encoder for test prints.
Error 59
The PX2 board is not calibrated. Calibrate the PX2 board.
Error 60
Preview too large.
Error 61
The speed of the line is too low. The speed must be at least 40 mm/s (2,4 m/min).
Error 62
The speed of the line is too high. The speed can be up to 550 mm/s (33 m/min).
Error 63
Printhead temperature.
Error 65
Print missed.
Error 66
Printhead encoder timeout.
Error 67
Under minimum speed.
Error 68
Over maximum speed.
Error 69
IP address invalid.
Error 70
Use command when paused.
Error 71
Wrong PX2 OS version.
Error 72
Some text is outside of the label area. Use label anyway?
Error 73
A graphic is outside of the label area. Use label anyway?
Error 74
An error occurred during booting. The label was removed.
Error 75
Print ramp timeout
Error 76
Loading variable backup
Error 77
Loading ontime backup
Error 78
Loading voltage backup
Error 79
Loading model backup
Error 80
Backup EEPROM failed
Error 81
Counters Reset
Error 82
Label made for another printer type.
Error 83
Total length of label including Y-offset is too long. Y-offset reset to 0.
Error 84
Print stopped. Print quantity has been reached.
Summary of Contents for qic i series
