Chapter 3 Printer Driver
Print Controller INSTRUCTION MANUAL 3-23
Separation
Define how far apart you want multiple watermarks to be on the page. If you have set the
count to one, this will be unavailable.
Font
Name
You can select only one font per watermark from the list shown by clicking the [
▼
] button.
When you change the font, the preview window will refresh itself by showing the effect of the
new font on the existing text sample displayed there.
The default font name is [Arial].
Color
Select the color of watermarks.
Select [Black], [Dark Gray], [Light Gray], or [White] from the color palette shown, by clicking
the [
▼
] button.
Darkness
You can control the “density” of the watermark text with this slider. If you slide this to the
right, the “density” of the watermark text will be more dense. If you slide this to the left, it will
be less dense.
Bold & Italic
When [Bold] is selected, bold formatting will be applied to your selected watermark text.
When [Italic] is selected, italic formatting will be applied to your selected watermark text.
When both of these are selected, bold and italic formatting will be applied.
Size
Select a point size for the font to be used in your watermark by clicking the [
▲
] or [
▼
] button
or by directly entering the size from the keyboard.
Position
Control the position of the watermark on the page manually or leave it at the automatic
setting and let the driver position it for you.
If you select [User defined], the controls below this option will be available and you can
define X axis position (left and right) and Y axis position (up and down) of the watermark on
the page by clicking the [
▲
] or [
▼
] button or by directly entering the values from the key-
board (0-100).
The value of [X] or [Y] represents the placement of origin (beginning) of the watermark in a
percentage of the total page width. In case of [X], a value of 20% means the watermark
begins 20% of the way across the page from left to right. In case of [Y], a value of 20%
means the watermark begins 20% of the way down the page from top to bottom.
Angle
Control the “lean” angle of the watermark by sliding this control back and forth or by typing a
number in the text value box from 0 degrees to 360 degrees (a full circle all the way around).
