Chapter 4 Control Panel Setup
4-10 Print Controller INSTRUCTION MANUAL
●
Set Default
Select [3. Set Default] on the Printer Menu screen to display the Setup screen.
Items on the LCD screen are as follows:
In this case the printer driver settings override settings you make here.
[1. Default Paper]
Press [1] to display the Paper Size Setup screen. The factory default is [3. A4].
1 A3
2 A4
3 A5
4 B4
5 B5
6 F4
7 11 x 17
8 8.5 x 14
9 8.5 x 11
10 5.5 x 8.5
11 8K
12 16K
13 16K
[2. Duplex]
Press [2] to set the default Duplex. Items of the Default Duplex Set Screen are as follows:
The factory default is [1. Off].
1 Off
2 Long Edge
3 Short Edge
[3. Orientation]
Press [3] to set the default Orientation. Items of the Default Orientation Set Screen are as
follows:
The factory default is [1. Portrait].
1 Portrait
2 Landscape
●
PCL Setup
Select [4. PCL Setup] on the Printer Menu screen to display the PCL Setup Screen.
Items of the PCL Setup Screen are as follows:
[1. Courier Style]
Touch [Courier Style] to set the Courier Style. Items of the Courier Style are as follows:
•
Dark : use old version Courier Style
•
Light : use new version Courier Style (Default)
[2. CR/LF Mapping]
Touch [CR/LF Mapping] to set the CR/LF Mapping. Items of the CR/LF Mapping are as follows:
•
CR/LF : replace line ending LF code to CR/LF
•
CR : does not convert line ending code (Default)
[3. Input Tray]
Touch [Input Tray] to set the Input Tray. Items of the Input Tray are as follows:
•
Auto Tray (Default)
•
Tray1
•
Tray2
•
Tray3
•
Tray4
•
Bypass
