Chapter 3 Printer Driver
Print Controller INSTRUCTION MANUAL 3-15
Duplex
Select the Duplex setting from the list shown by clicking the [
▼
] button.
Default is [None].
The settings you can select is as follows:
[None], [Flip on long edge], [Flip on short edge]
[Flip on long edge]
Prints paper so that heads of
both sides become upward
[Flip on short edge]
Prints paper so that the head
of the front becomes the foot
of the back.
Output Tray
Select an output tray from the list shown by clicking the [
▼
] button. When the Finisher or Inner
Tray option is not selected in [Setup] tab, or when the Finisher or Inner Tray is not installed, any
setting other than [Default] and Tray 1 is ineffective.
Features
Offset
[ON] offsets each copied set upon exit.
How to offset papers differs depending on wether the Finisher is installed or not.
Three sets
Three sets
Three sets
Two sets
Two sets
Two sets
One set
One set
One set
Without FS-107
None
Example)
With FS-107
•
When the FS-107 is not installed, every set of copies is output in a direction at right angles
to the previous set of copies.
•
When the FS-107 is installed, every set of copies is offset upon exit.
When the FS-107 is not installed, make sure to set the papers same as printing paper
size to both portrait tray and landscape tray.
(Example: A4- and A4R-size papers or B5- and B5R-size papers)
