Chapter 7 PC-FAX
7-6 Print Controller INSTRUCTION MANUAL
●
Fax Mode Setup
The following describes how to set the Print After Send, Delay Transmission, Sub Address, and Sender
ID settings.
The following operation is carried out in the [Detail] dialog that appears when you click the [Setup]
button in the [Fax Mode Setup] in the [FAX] tab.
Printing out a sent file.
Checking [Print After Send] lets the copier to print out the content of a file after it is sent out.
Sending a file at a predetermined time
Checking [Delay Transmission] lets a file be sent at a predetermined time.
You can directly enter a desired time into the [Send Time] box. Or you can click the [
▼
] or [
▲
]
button next to the [Send Time] box.
When using the Delay Transmission feature, check to be sure that the time indication
on your computer coincides with the time indication on the copier. If there is any
discrepancy,the file may be held for as long as 23 hours and 59 minutes before it is
sent.
Sending a fax with F-code
Checking [Sub Address] and [Sender ID] allows you to enter a sub address and sender ID for
sending a fax with F-code.
For details on Sub Address and Sender ID, refer to your Fax Kit User’s Guide.
