Chapter 6 Printer EKC
Print Controller INSTRUCTION MANUAL 6-3
●
EKC Limit
If you try to exceed the limit previously set in Printer EKC, the following will occur depending on the
settings of Printer EKC.
When in doubt about the Printer EKC settings, ask your system administrator.
When a print job is transmitted after reaching a limit:
•
A message will appear indicating that the EKC counter reached a preset limit, but the printing
process is brought about normally and the EKC counter increments as if nothing happened.
•
No output is produced and the job is registered on the Unsuccessful jobs list.
If the EKC counter hits a preset limit in the process of getting an output:
•
A message will appear indicating that the EKC counter reached a preset limit, but the printing
process is brought about normally and the EKC counter increments as if nothing happened.
•
After the current print job is completed, no additional jobs are accepted. If you try to transmit
the next print job, it is deleted and registered on the Unsuccessful jobs list.
•
The print job instantly stops, causing the already fed paper to be output. The job is registered
on the Unsuccessful jobs list.
A print job deleted by the Printer EKC feature is registered on the Unsuccessful jobs list.
For information on checking the Unsuccessful jobs list screen, refer to “ Appendix A
Troubleshooting ”.
