manualshive.com logo in svg

Komatsu Utility SK714-5, Shop Manual

The Komatsu Utility SK714-5 Operation & Maintenance Manual is an essential resource for owners and operators of this versatile machine. This comprehensive manual provides detailed instructions and information on safe operation and routine maintenance. Download it for free from manualshive.com and ensure optimal performance and longevity of your SK714-5.

Share
Download
background image

30-29

SK714-5  SK815-5  SK815-5 turbo

REMOVAL OF THE FUEL TANK (SK815-5 turbo)

★

Drain the fuel.

Fuel: max. 50 

1  - Remove the screws (1) and loosen the screws (2), leav-

ing them in place.

2 - Disconnect the connector (3) from the level sensor and

disconnect the connector from the reverse gear chime,
if installed.

3 - Disconnect the supply (6) and return (7) hoses from the

pre-filter (4).

4 - Loosen the screw (8) and remove the support (9).

RKSA0451

1

2

2

1

1

RKSA2420

3

RKSA2430

7

5

4

6

RKSA2440

9

8

REMOVAL AND INSTALLATION

FUEL TANK (SK815-5 turbo)

Summary of Contents for SK714-5



































































































































































































































































Reviews:

No comments

Related manuals for SK714-5

Brands by name

Popular brands

Load more brands