manualshive.com logo in svg

Komatsu Utility SK714-5, Shop Manual, Page: 153 / 258

Share
Download
Komatsu Utility SK714-5 Shop Manual Download Page 153

20-21

SK714-5 SK815-5  SK815-5 turbo

CHECKING ENGINE OIL PRESSURE

When measuring the engine oil pressure, take great
care not to touch high-temperature parts, or to become
entangled in rotating elements.

★

Check pressure with the engine at working temperatu-
re.

★

Low and high idling within permissible limits.

1 - Start the engine and wait for it to reach working tempe-

rature.

★

Working temperature:
Coolant liquid: 90°C
Engine oil: 110°C

2  - Stop the engine and remove the oil pressure sensor (1).

3 - Mount the adapter 

D1

 and connect the pressure gauge

D2

.

4 - Start the engine and check the oil pressure at low idling

(accelerator lever in low idling position) and at high
idling ((accelerator lever in high idling position).

★

Low idling pressure: min 1 kg/cm

2

★

High idling pressure: 3.3 - 4.8 kg/cm

2

5  - Remove the adapter 

D1

 and install the oil pressure sen-

sor (1).

RKSA0100

1

RKSA0110

D

2

D

1

TESTING AND ADJUSTMENTS

CHECKING ENGINE OIL PRESSURE

Summary of Contents for SK714-5



































































































































































































































































Reviews:

No comments