manualshive.com logo in svg

Komatsu Utility SK714-5, Shop Manual

The Komatsu Utility SK714-5 Operation & Maintenance Manual is an essential resource for owners and operators of this versatile machine. This comprehensive manual provides detailed instructions and information on safe operation and routine maintenance. Download it for free from manualshive.com and ensure optimal performance and longevity of your SK714-5.

Share
Download
background image

20-32

SK714-5 SK815-5  SK815-5 turbo

CHECKING THE TRAVEL DEVIATION

★

Test conditions:

•

Engine: at working temperature

•

Hydraulic oil temperature: 45

–55 °C.

★

Drive the machine onto solid, level ground.

1.

Checking the deviation

1 - Position the boom and bucket in their travelling posi-

tions.

★

Boom lowered and bucket fully curled.

2 - Bring the engine up to maximum rpm.

3 - Push the travel lever to full stroke forwards

4 - Travel for 10 metres, then measure the deviation of the

machine over the next 20 metres.

5 - Check the deviation also in reverse gear and while ac-

celerating in both directions.

RKS01270

RKS01281

10 m

10 m

10 m

Theoretical line

of travel

Measure the

of the deviation

TESTING AND ADJUSTMENTS

CHECKING THE TRAVEL DEVIATION

Summary of Contents for SK714-5



































































































































































































































































Reviews:

No comments

Related manuals for SK714-5

Brands by name

Popular brands

Load more brands