manualshive.com logo in svg

Komatsu Utility SK714-5, Shop Manual

The Komatsu Utility SK714-5 Operation & Maintenance Manual is an essential resource for owners and operators of this versatile machine. This comprehensive manual provides detailed instructions and information on safe operation and routine maintenance. Download it for free from manualshive.com and ensure optimal performance and longevity of your SK714-5.

Share
Download
background image

30-12

SK714-5  SK815-5  SK815-5 turbo

REMOVAL OF THE MUFFLER (SK714-5  SK815-5)

1 - Loosen the screws (1), remove the support (2) and the

protection (3).

2  - Loosen the screws (4) of muffler support (5) and remove

it.

3  - Loosen the screws (6) of muffler support (7) and remove

it.

4 - Loosen nut (8) and remove muffler (9).

★

A new seal (10) should be fitted each time the muf-
fler is removed.

INSTALLATION OF THE MUFFLER

•

To install, reverse removal procedure.

RKSA1870

5

1

2

3

4

RKSA0381

6

7

9

RKSA1880

8

RKS01721

10

REMOVAL AND INSTALLATION

MUFFLER (SK714-5  SK815-5)

Summary of Contents for SK714-5



































































































































































































































































Reviews:

No comments

Related manuals for SK714-5

Brands by name

Popular brands

Load more brands