18
PART 1 PREPARATION FOR MEASUREMENT
1. UNPACKING AND STORE OF INSTRUMENT
·
Unpacking of instrument
Place the case lightly with the cover upward, and unlock the case, take out the instrument.
·
Store of Instrument
Cover the telescope well, place the instrument into the case with the vertical clamp screw and circular level
upward (Objective lens toward tribrach), tighten the vertical clamp screw and lock the case.
2. SETTING THE INSTRUMENT UP
Place the instrument on the tripod. Level and center the instrument precisely to ensure the best performance.
Use the special center point.
Operation Refer to ”Leveling and Centering the Instrument”
1.
Setting up the tripod
①
Make sure the legs are spaces at equal intervals and the head is approximately level.
②
Set the tripod so the center of the head is directly over the surveying point.
③
Step on the tripod shoes to make sure the tripod is firmly fixed on the ground.
2.
Installing the instrument on the tripod
①
Place the instrument carefully on the tripod head
②
Supporting the instrument with one hand, tighten the centering screw to fix it to the screw on the base
plate of the instrument.
3.
Roughly leveling the instrument by the circular level
①
Turn the leveling screw A and B to move the bubble in the circular level, in which case the bubble is
located on a line perpendicular to a line running through the centers of the two leveling screw being
adjusted.
①
Turn the leveling screw A and B to move the bubble in the circular level, in which case the bubble is
located on a line perpendicular to a line running through the centers of the two leveling screw being
adjusted.
Summary of Contents for KTS440 L Series
Page 9: ...9 3 NOMENCLATURE ...
Page 10: ...10 ...
