138
⑶
After the export of all the coordinate data has
been completed, it returns to the “Known
Point Menu Screen”.
Data export accomplished.
Job Export
From A:\ Coord.PTS
To B:\ JOB1.TXT
ESC
20.2.4 Entering coordinate data from computer
·
The format of the coordinate data is the SDR33. There are two formats, see below:
1. /Dg 123.456, -1234.123, 12.345, BE122 CODE[SUM]CRLF
a b c d e f
Data identification code
N coordinate
E coordinate
Z coordinate
2. The coordinate format which is provided by KOLIDA software.
Point number
，
，
E
，
N
，
Z CRLF
First, edit coordinate format with KOLIDA communication software on computer.
·
Second, set communication parameters on total station.
（
Refer to “23.1Changing Instrument Parameters”
）
Operating Procedure
Operation
Display
⑴
Select “2. Known data” in the “Memory
Mode Screen” and press ENT to show the
“Known Point Menu Screen”.
“2. Known
data”
+
ENT
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
⑵
Select “4. Comms input” and press ENT,
the “Data Format Display Screen” is
displayed. Press ENT again, start data
reception. The received data amount is showed
on the bottom of the screen.
“4.Comms
input”
+
ENT
Comms input
Transfer: USB
Job: A:\COORD. PTS
Receiving
STOP
⑷
Data input finished, display returns toknow
data screen.
1. Key in coord
2. coord import
3. coord export
4. comms input
5. comms output
6. clear
Summary of Contents for KTS440 L Series
Page 9: ...9 3 NOMENCLATURE ...
Page 10: ...10 ...
