92
(3)
Sight the target and press OBS.
If the repetition measurement mode is turned on,
press STOP to terminate it and it shows
measurement value..
Sight target
+
OBS
Set-out line ( L)
N: 2.219m
E: 1.115m
Z: -0.097m
HAR 27 43‟ 58”
R. HT NO YES
(4) Press YES to use the measurement results.
Displays the difference between the measured
point and the baseline.
·
Offline: the offset value from the occupied point
and the line to be set out. A positive value
indicates that the point is on the right of the
line. A minus value indicates that the point is on
the left of the line.
·
Cut: The height difference between the occupied
point and the baseline. A positive value
indicates the point is above the baseline. A
positive value indicates the point is below the
baseline.
·
Length: Distance along the baseline from the
first point to the measured point.
·
Press NO to observe the target again.
YES
Set-out line ( L)
OFF.L: 2.219m
d.E1ev: 1.115m
Length: -0.097m
OBS REC P2
Set-out line ( L)
N: 2.219m
E: 1.115m
Z: -0.097m
OBS REC P1
⑸
Sight the next target and press OBS to
continue the measurement.
·
PressREC to record the measurement results.
Sight the next
OBS
Set-out line ( L)
N: 2.219m
E: 1.115m
Z: -0.097m
HAR 27 43‟ 58”
R. HT NO YES
Summary of Contents for KTS440 L Series
Page 9: ...9 3 NOMENCLATURE ...
Page 10: ...10 ...
