35
·
In advance allocate the function keys to display HOLD. For the allocation method, see “18.1.1Key Function
Allocation”.
PROCEDURE
Under MEAS Mode screen, Display the desired angle of the horizontal angle.
Operating Procedure
Operation
Display
⑴
Under MEAS mode screen, Display the
HOLD function.
Allocate
the
function
keys to
display
HOLD
Meas
.
PC -30
PPM 0
3
ZA 89°59′54″
HAR 90°01′00″
P1
SDIST SHV HOLD EDM
⑵
Use the horizontal clamp and tangent screw
to display the required direction value. Press
HOLD, the key start flashing, press HOLD
again, the [HAR] is in the hold status.
HOLD
+
HOLD
Meas
.
PC -30
PPM 0
3
ZA 89°59′54″
HAR 0° 0′00″
P1
SDIST SHV HOLD EDM
⑶
Sight the target and press HOLD to unlock
the angle, set the sighting direction to the
required direction value.
HOLD
Meas
.
PC -30
PPM 0
3
ZA 89°59′54″
HAR 0° 0′00″
P1
SDIST SHV HOLD EDM
8.3 Horizontal Angle Display Selection
（
Right /Left
）
·
It is possible to switch between Right Angle (horizontal angle clockwise) display and Left Angle (horizontal
angle counterclockwise) display.
·
In advance allocate the function keys to display [R/L]. Refer to “22. Key Function Allocation”.
Summary of Contents for KTS440 L Series
Page 9: ...9 3 NOMENCLATURE ...
Page 10: ...10 ...
