71
⑶
Sight prism 1, press OBS. to begin
measurement.
OBS.
Dist
Dist PC = 0
PPM = 0
Fine “S”
STOP
⑷
When observation has been completed or
after the measurement values are displayed
during repeat measurement, press STOP to
display the “1 st Target Observation Result
Screen.” The coordinates of the 1 st are displayed.
Offset/2D
N 19.234
E 5.098
Z 1.234
Sure ?
NO YES
⑸
Press YES, the “2 nd Target Observation
Screen” is displayed. (If to re-observe prism 1,
press NO)
YES
Offset/2D
Take 2 nd point.
ZA 89°47′23″
HAR 150°16′12″
OBS.
⑹
Sight prism 2 and press OBS. to begin
measurement.
OBS.
Dist.
Dist PC = 0
PPM = 0
Fine “S”
STOP
⑺
after measurement finished. Press STOP to
display the “2 nd Target Observation Result
Screen.” The coordinates of the 2 nd are
displayed.
Offset/2D
N 9.234
E 5.098
Z 1.234
Sure ?
NO YES
⑻
Press YES, the “Offset Distance Entry
Screen” is displayed. (Discard the data and
observe the 2 nd target again: press NO)
YES
Offset/2D
B-C
：
1.800 m
OK
Summary of Contents for KTS440 L Series
Page 9: ...9 3 NOMENCLATURE ...
Page 10: ...10 ...
