KLARO GmbH
14
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
Control KLbasic/KL24base
Control KLplus/KL24plus
Figure 3: View of the Operating Unit KLbasic/KL24base
Figure 4: View of the Operating Unit KLplus/KL24plus
Operating Status Display
The operating status of the system is indicated by the LED (green = operation/red = malfunction) and
as text on the LCD screen.
In normal operating mode (aeration mode), the liquid-crystal display looks as follows:
Figure 5: View of the Liquid Crystal Display During the Aeration Phase
In automatic mode, the LCD shows the current operating phase and the time remaining in this phase.
If a malfunction occurs, a message appears on the LCD, indicating which component is faulty (e.g.,
malfunction compressor).
Note:
The behaviour in the event of a malfunction is described in more detail under Point
8
.
The following operating phases are displayed:
Display
KLbasic/KL24base
Operation performed
Display
KLplus/KL24plus
Charging
Valve 1 is activated, the charging lifter supplies
wastewater to be treated from the sludge storage to
the bio reactor.
Charging
Deni
Valve 2 is activated intermittently, the activated
sludge is mixed briefly with the wastewater. This is
followed by long pauses (reaction times).
Denitrification
Aeration
Valve 2 is activated, the bio reactor is aerated at
intervals.
Aeration
Settlement
No valve is activated, the activated sludge settles in
the bio reactor.
Settling Phase
Draining
Valve 3 is activated, the clear water is pumped into
Draining phase
Aeration
120.10m
Aeration
Remaining: 120.10 min
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
14
