KLARO GmbH
8
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
2.2. Hazard statements
1. To ensure safety, all persons coming into direct contact with the plant must take note of the
contents of this documentation.
2. It is prohibited to use the system for a purpose other than that described by the manufacturer.
3. Locally applicable labour and safety regulations and laws must be followed even if they are not
explicitly listed in this guide. The same applies to environmental legislation.
4. If the operator detects faults or dangers, the manufacturer or the responsible maintenance
company must be informed immediately.
5. Safety devices must never be removed or bypassed during normal operation of the machine.
Safety devices may be temporarily bridged or disabled only by maintenance staff during repair
and maintenance.
6. When handling chemical substances, contact with chemicals should be avoided where possible.
Before beginning work with these substances, the instructions on the package must be read
and followed.
7. If the use of personal protective equipment (safety shoes, safety glasses, gloves, ear protection,
etc.) is required, it must be ensured that it will be used. Defective or damaged personal
protective equipment must be replaced immediately with properly functional protection.
8. Work on electrical installations may only be performed by qualified personnel.
9. All safety instructions and warnings on the machine must be kept in easily legible condition.
10. Hot parts must not come into contact with explosive or flammable chemicals.
11. Do not place objects filled with liquids on electrical cabinets; spillage of liquid can cause short
circuits.
12. The system must not be operated under the influence of alcohol (be careful about any residual
alcohol from the previous day!) or of medication affecting perception and responsiveness.
13. Before any maintenance and cleaning work, the plant must be de-energized.
14. The plant must always be left running, except for maintenance purposes, because proper
wastewater treatment cannot be ensured otherwise.
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
KLARO GmbH
2
Original Operating Manual for KLARO Small Wastewater Treatment Plant V.15.07
IMPORTANT:
•
This Operating Manual contains information about the plant, from installation
to maintenance, and must therefore be read before commissioning of the
plant!
•
All safety instructions must be observed!
•
The Operating Manual must be kept readily available during the operation of
the plant!
Plant Specifications
For any questions in the course of the operation of the plant, the specifications of your plant should
be noted as follows. With the help of this information, our staff will be able to help you more quickly
in the event of a malfunction. The specifications can be found on the nameplate, which is located
on the outside of the cabinet door for indoor cabinets, and inside the cabinet for outdoor cabinets.
Small Wastewater Treatment
Plant
PT
Sludge storage
Buffer
SB-Reactor
Approval No.:
Process class:
Certified:
Cabinet:
Controller:
Compressor:
Denomination:
Serial No.:
Article No.:
Additional module:
Article No.:
El. Connected load:
8
