Kirisun DP580-01 Page 26 User Manual Download | Manualshive

Page: 26 / 69

background image

DP580-01 Digital Two-way Radio

25

(1) Plug the power adaptor in the proper socket of AC power.
(2) Plug the cable of the power adaptor at the back of the socket,

and the green indicator glows.

(3) Plug the battery or radio in the charger.
(4) Make sure that the battery is in proper contact with the charger

terminal, and the red indicator glows.

(5) After the battery is charged for 6 hours, the red light goes out,

indicating that the battery is fully charged.

(6) When the green indicator glows, keep the battery on the charger

for 1-2 hours before taking it out so as to achieve the optimal
performance.

(7) Take out the power adaptor from the socket of AC power output.

Note:



The battery is not charged before delivery from the factory, so please charge the battery before your
first use.



Kirisun KB-75A lithium-ion can be used for this radio.



If the battery which is stored for over 2 months or a new battery is charged for the first time, it should be
charged repeatedly to gain full battery capacity. The battery should be at least charged once every

«
...
24
25
26
27
28
...
»

Summary of Contents for DP580-01






































































Reviews:

No comments

Related manuals for DP580-01

Brand: MicroTalk Pages: 10

Brand: Hytera Pages: 24

Brand: Vectronics Pages: 31

Brand: Icom Pages: 6

Brand: Outmark Pages: 18

Brand: Sangean Pages: 7

MARINE MR HH330 FLOAT

Brand: Cobra Pages: 35

Brand: Craftsman Pages: 10

Brand: Craftsman Pages: 14

Brand: JVC Pages: 32

KT-SR2000 - Sirius Satellite Radio Tuner

Brand: JVC Pages: 32

Sirius KT-SR3000

Brand: JVC Pages: 48

Brand: JVC Pages: 44

Brand: JVC Pages: 28

Brand: JVC Pages: 40

Brand: JVC Pages: 32

Brand: Roberts Pages: 36

Brand: Solectek Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands