Kirisun DP580-01 User Manual Download Page 40 | Manualshive

Page: 40 / 69

background image

DP580-01 Digital Two-way Radio

39

LED glows to indicate that carrier is received.

When the current channel is digital channel and when it received private call, group call or all call, the radio
will output the voice from the channel. A page containing the contact’s ID or alias, call type (private call,
group call or all call), and the icon of incoming call will be displayed. If the contact is in the contact list,

contact alias will be displayed; otherwise contact ID will be displayed.

When the channel is analogue channel and when it received analogue signals with CTCSS matching the

one on this channel (or there is no CTCSS set on the channel), the radio will output voice form the channel.

6.6 Replying to a Call

When the current channel is digital channel and after a call is received, press the PTT button within the

calling duration to reply. Within the duration, yellow light flashes, and the page of incoming calling is

displayed. If the calling duration is up, you need to initiate a call to reply. The calling duration can be set by

the dealer.

When the current channel is analogue channel and after a call is received, press the PTT button and speak

to the microphone to reply.

6.7 Switching to a Zone

«
...
38
39
40
41
42
...
»

Summary of Contents for DP580-01






































































Reviews:

No comments

Related manuals for DP580-01

Brand: Ocean Digital Pages: 38

Brand: Ritron Pages: 36

Brand: Yaesu Pages: 51

Brand: HYT Pages: 32

Brand: Grundig Pages: 30

Brand: Retekess Pages: 14

Brand: Hytera Pages: 9

Brand: Uniden Pages: 4

Brand: Denver Pages: 8

Brand: Entel Pages: 2

Brand: Medion Pages: 40

Bendix/King EMH

Brand: BK Radio Pages: 16

Brand: Icom Pages: 1

Brand: auna Pages: 92

Brand: Garmin Pages: 20

Brand: Retevis Pages: 27

Brand: Uniden Pages: 2

Brand: Uniden Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands